TR-35 band switching fail

Do you have a question about choosing a radio, installing an antenna, or are you simply seeking advice about getting started in QRP and field radio? This is a place where you can ask your questions and seek guidance from a wide variety of radio enthusiasts. No questions are too simple. You will be treated with respect here.
Post Reply
K9DRP
Posts: 7
Joined: Mon Jun 06, 2022 1:29 pm

TR-35 band switching fail

Post by K9DRP »

Got my TR-35 out last night to check it out for an expected POTA activation this weekend, and found that the band switch would not change bands. It was stuck on 20 meters. Opened it up and visually checked the solder connections on the band switch. They looked fine but I reheated them and added a little dab of solder. And Viola! The band switch works again.

I considered reheating all the switch terminals while I was in there, but decided "If it ain't broke, don't fix it".

Just offering the experience I had in case someone else runs into the same problem.

72,

Don, K9DRP
Don, K9DRP
Post Reply