9v or 12v for sw-3b

Do you have a question about choosing a radio, installing an antenna, or are you simply seeking advice about getting started in QRP and field radio? This is a place where you can ask your questions and seek guidance from a wide variety of radio enthusiasts. No questions are too simple. You will be treated with respect here.
Post Reply
dahditdah
Posts: 1
Joined: Fri Sep 22, 2023 2:38 pm

9v or 12v for sw-3b

Post by dahditdah »

Any risk to the radio running a 12v battery? I have a vague recollection of reading of a potential issue if using a 12v battery. The facts get increasingly vague every year!
Top
N8TGQ
Posts: 74
Joined: Tue Jun 21, 2022 5:06 am

Re: 9v or 12v for sw-3b

Post by N8TGQ »

I believe the sw-3b will run anything between 8 and 15 volts. 12 volts shouldn't be a problem.
Rick N8TGQ
Top
SkipRD
Posts: 60
Joined: Fri May 27, 2022 12:58 pm

Re: 9v or 12v for sw-3b

Post by SkipRD »

I've run my SW-3B on LiFePO4 voltage (13+) just fine.
73 Skip K4EAK
Top
kc0myw
Posts: 25
Joined: Thu May 18, 2023 4:26 am

Re: 9v or 12v for sw-3b

Post by kc0myw »

From the SW-3B Manual (http://venus-itech.com/download/SW-3B%20Manual.pdf)
Operating voltage: 8-15VDC
I think you should be fine with a 12V battery. I'm planning to get one of these at some point and I'll probably run it from my Bioenno batteries.

The vague recollection you may be having COULD be because the MTR series which is a similar form factor has warnings in its manual regarding voltages over 12V and states:
Supply voltage 5.5 volts minimum, 13 volts maximum. 6 to 12 recommended.
Top
Post Reply

Return to “Questions & Advice”