The QRPer Board

and then here are some considerations regarding vertical antennas

https://practicalantennas.com/designs/v ... s/5eights/

HTH

also see

https://www.onallbands.com/dipoles-a-do ... et-weapon/

ok, perfection isn't of this world, but let's just try to play with some imagination, start with an existing or a non existing rig, and add all the features you feel important for a POTA/SOTA activator or for a hunter, come on, let's raise some holidays dust :) P.S. keep real, don't ask for dilythi...

if space is constrained and you are ok with using an ATU, you may consider this linear loaded doublet

https://www.m0pzt.com/80m-cobra-doublet/

which allows to cover all bands from 80m up

Good morning, Got a question regarding my 49:1 and wire length. Is there a wire length that is shorter than the 67' roughly that I'm currently using for multi band ? Im looking to get a short no tune 40m wire made up. The current 67ish feet im currently using is great but just looking to go short t...

Voacap is fantastic. I shared the tool with my club a couple months back, was well received. Nice write up on Dipole as well. Thanks for sharing! I agree regarding VOACaP but my post was mainly about the best height for a dipole and it starts at a minimum of 0.6 wave height, a dipole at such height...

https://www.aa5tb.com/efha.html

worth a careful read imVHo

if someone here isn't familiar with ERP/EIRP and antenna gain, my suggestion is to try this

https://m0ukd.com/calculators/erp-eirp-calculator/

just enter the output power of your TX and the antenna gain and check the EIRP value, then change the antenna gain and look at its effect

read this

https://www.aa5tb.com/efha.html

HTH

https://www.aa5tb.com/efha.html

I think one of those, cut for the 80 or 160 meters band may fit pretty well the kite setup