Anderson Powerpole to Elecraft connector

Do you have a question about choosing a radio, installing an antenna, or are you simply seeking advice about getting started in QRP and field radio? This is a place where you can ask your questions and seek guidance from a wide variety of radio enthusiasts. No questions are too simple. You will be treated with respect here.
Post Reply
N8XMS
Posts: 1
Joined: Fri Oct 27, 2023 12:23 pm

Anderson Powerpole to Elecraft connector

Post by N8XMS »

In Thomas's recent KX1/AX1 video I noticed that he used a small bit of cable to convert the Anderson powerpole output of his battery pack to the barrel connection for his Elecraft KX1. Was this a homebrew converter or a commercial product?

73,
Paul - N8XMS
Top
SkipRD
Posts: 60
Joined: Fri May 27, 2022 12:58 pm

Re: Anderson Powerpole to Elecraft connector

Post by SkipRD »

I just made one. The KX2 power plug is a standard 5.5/2.1mm jack. I bought 20 of 'em (I guess I need 19 more KX2s) for $10: https://www.amazon.com/CENTROPOWER-Conn ... SDF4S?th=1. Then just crimp the PowerPoles onto the ends of the leads. Powerwerx also makes them pre-made. E.g., this one: https://www.hamradio.com/detail.cfm?pid=H0-011068. I can't remember if they make one with a shorter cord.

73 Skip K4EAK
Top
Post Reply

Return to “Questions & Advice”